Comments on: HP FX900 Pro 2TB PCIe Gen4 NVMe SSD Review

By: Bob Snyder

Bob Snyder — Fri, 08 Jul 2022 13:42:18 +0000

Headbrother: Designed, built & sold under HP Official License by BIWIN.

By: Nate77

Nate77 — Fri, 10 Jun 2022 19:30:06 +0000

Strongly disagree Wildcard. When you have 25GbE 40GbE or faster, it is easy to need NVMe sequential read speed limits. That’s easy.

By: Wildcard

Wildcard — Thu, 09 Jun 2022 23:03:53 +0000

SEQUENTIAL READ MEANS NOTHING FOR NVME.

By: Will Taillac

Will Taillac — Mon, 06 Jun 2022 23:53:48 +0000

Any drive that hits thermal limits during testing gets active cooling so that benchmarks are not affected by thermals.

By: BetterTestSetup

BetterTestSetup — Mon, 06 Jun 2022 19:48:32 +0000

If the drive hits 82C it is definitely thermal throttling. Not sure if your test bench varies during the tests for speed vs thermals but you can’t compare the speed of if it’s thermal throttling and the other drives aren’t. For thermal tests sure, but if that same setup is used for transfer rate tests you have a bad system. Throw a little water loop with one of the Corsair m.2 water blocks on it so you can get good comparisons on all your drive speed tests.

By: Headbrother

Headbrother — Mon, 06 Jun 2022 10:52:16 +0000

Who is the component supplier for this HP product?